RT8616 Pure Acrylic Polymer
RT8616 is a pure acrylate copolymer emulsion, suitable for various internal/external wall latex paint substrates, and also used as a binder for various other applications and substrates.
- Suprior Weather Resistance
- Good Adhesion
- WaterResistance
- Alkali Resistance
RT8616 TDS
- Technical Data Sheet
| Property | Typical values |
| Appearance | Milky white liquid with blue phase |
| Solid content(wt%) | 48 ±1% |
| pH value | 8.0 -9.5 |
| Viscosity(mPa·s) | 200 – 1000 |
| Calcium ion stability( 5% CaCI,1:5) | PASS |
| Mechanical stability (2800 rpm, 1hr) | PASS |
| Minimum film forming temperature (MFFT) ℃ | 38 |
| Tg(℃) | 38 |
| Ionicity | Anion |
RT8616 Typical Application
Package and Storage
RT8616 should be keep in a dry and ventilated place at temperatures between 5°C and 30°C in tightly sealed containers, valid for 6 months.
Stir well before use. Avoid direct sunlight. Avoid freezing of the material!
Customer Notice
RT8616 should be protected against microbial attack during transportation and storage with sealed original packaging. We provides customization package.
To avoid microbial attack during processing and in opened packaging attention should be paid on hygiene. In some cases it could make sense to add biocides to avoid problems with microorganisms.
Download the TDS or Contact Our Experts for a Customized Formulation
FAQ About RT8616 Pure Acrylic Emulsion Polymer
Yes. Our pure acrylic emulsion polymer are developed with excellent chemical stability. They can work seamlessly with cellulose ethers (like HPMC/HEC) and various polycarboxylate thickeners or additives . You can add the dispersant during the pigment grinding stage for the best results.
You can compare the emulsion MFFT (℃) with the minimum application temperature:
It is generally safer to maintain an MFFT lower than the minimum application temperature approximately 5–10℃.
You can choose a lower MFFT emulsion for low-temperature environments such as exterior walls.
If the products with a medium to high MFFT, then it is suitable for high-performance coatings (high hardness/fast drying).
