RT8334 Defoamer
RT8334 is a high-performance liquid defoamer with long-lasting foam suppression. It demonstrates exceptional foam inhibition and breaking effects in resin emulsions, water-based coatings, water-based inks, adhesives, and other systems.
- Outstanding in the process of dispersion and grinding.
- The bubble burst speed is fast in the process of roll coating.
- Break foam more quickly than ordinary defoaming agents and break fine bubbles more obviously.
- Especially suitable for high viscosity and high emulsion content systems.
RT8334 TDS
- Technical Data Sheet
| Chemical composition | Mineral oil defoamer |
| Active content | approximately 100% |
| Appearance | A pale white to slightly yellow opaque liquid |
| Specific gravity (25°C) | 0.85-1.0 |
RT8334 Directions for Use
- The recommended addition is 1-1.0% of the total formulation.
- The specific dosage should be adjusted by the customer according to actual conditions.
- Freezing should be avoided, and the product must be thoroughly stirred or shaken before use.
RT8334 Typical Application
Packaging and Storage
Available in 25kg/bucket and 180kg/bucket, and offer customized packaging options.
Keep away from direct sunlight at 5°C to 35°C and keep unopened when stored. The validity period is twelve months.
Download the TDS or Contact Our Experts for a Customised Formulation
FAQ About RT8334
If it is frozen, thaw this liquid defoamer to room temperature and stir thoroughly before use. And it’s better to test before the application.
Yes, RT8211A can be post-added to control foam during filling. Please make sure to mix adequately for optimal dispersion.
Yes, RT8211A does not contain intentionally added heavy metals.
With proper use, our defoamer RT8334 will not cause gloss issues or surface defects. This grade of defoamer is designed with good system compatibility for water-based coatings and high-emulsion systems to minimize these defects.
Yes, our defoamer RT8334 performs especially well under high shear conditions. It has good functions on rapid foam breaking and effective microfoam control during dispersion and grinding.
